Продам MBF PUR350 for window frame & skirting в Shenyang

This machine has one head and three fuselages

  1、The machine body is finished by gantry milling, and the flatness tolerance is controlled within 5 wires (0.05mm).

2、The transmission method uses a motor to drive a worm gear to drive, with forward and backward transmission capabilities. The bottom conveying wheel adopts an ordinary conveying wheel, and each conveying shaft is equipped with 2 sets of conveying wheels; the outer layer of the transmission wheel is wrapped with silica gel to ensure that the product is not scratched or crushed.

3、All vertical rods, guide rods, and universal joints are chrome-plated on the surface, with a thickness of 3-5 wires, which achieves beautiful appearance and anti-rust effect.

4 、 Dust the coated surface of the product with a brush, and connect a dust collector to collect the sweeped dust; behind the dust removal, there is a set of air blowing device to blow off some difficult dust on the surface of the product, To ensure that the surface cleanliness of the product meets the requirements of covering leather.

6 、 The substrate and film heating device is heated by a far-infrared gold-plated heating tube, which can achieve the maximum power within (3-7) s, and increase the surface temperature of the substrate and film by (10-15 ) ℃, and the heating temperature can be adjusted. , The length of the substrate heating device is no shorter than 1m; the film heating device is no shorter than 0.6m;

7 、 Before the profile enters the laminating process, apply the affinity agent to the parts to be processed to meet the surface energy requirements of the profile laminating. The affinity agent flows into the felt box from the temporary storage box and enters the surface of the profile to be smeared; the felt is an imitation felt, It can be quickly replaced and customized according to different products; the upper box of the affinity agent is made of stainless steel, and the conveying pipeline is made of PTFE corrosion-resistant materials.

8 、 The tile-type air expansion shaft is used to tighten after the PVC film roll or veneer is placed, and magnetic powder brakes are used (some peers use pneumatic brakes or belt brakes). The left and right movement of the air expansion shaft adopts a DC electric push rod, and two buttons respectively control the left and right translation of the air expansion shaft to achieve the corrective effect of the film.

9 、 One machine head and three fuselages can quickly change the fuselage according to the different shapes of the workpieces to improve work efficiency.