Продам Laser alignment, dynamic balancing and diagnostics smoke exhausts в Hamburg



Laser alignment, dynamic balancing and diagnostics smoke exhausts Laser alignment, dynamic balancing and diagnostics smoke exhausts Laser alignment, dynamic balancing and diagnostics smoke exhausts Laser alignment, dynamic balancing and diagnostics smoke exhausts Laser alignment, dynamic balancing and diagnostics smoke exhausts Laser alignment, dynamic balancing and diagnostics smoke exhausts Laser alignment, dynamic balancing and diagnostics smoke exhausts Laser alignment, dynamic balancing and diagnostics smoke exhausts Laser alignment, dynamic balancing and diagnostics smoke exhausts Laser alignment, dynamic balancing and diagnostics smoke exhausts
Цена договорная
В наличии
Hamburg (Германия)
Состояние: Новый
Контакты
abakshinaev
Елена

+49 (0) 451-370-87-7


Детальное описание

Draft machines serving for removal of flue gas combustion products called the smoke exhausts. Usually most common centrifugal type and are used in power or fire-prevention measures organizations.

Certain types of fans can also be used as a smoke exhausts. Movable temperature Exhauster can reach up to 400 ° C. Exhaust fans are designed so that the operation is not interrupted and can be installed both indoors and in the outdoors.

The design of exhaust fans are divided into two types:

• Planting of the impeller on the motor shaft. Dimensions of the unit obtained less than the second type of performance.

• Planting of the impeller on the shaft of the drive chassis. For such a machine will require a large driving power, but he obtained a reliable and durable. In this embodiment the shaft chassis can be to bridge the motor shaft through the coupling or belt drive.

Like any other machine, exhauster has its haraternye cause of the fault, which can lead to excessive vibration, reduce power and efficiency, and at times to failure of the machine. They can be mechanical, electrical and aerodynamic nature.

Consider a mechanical cause:

• Impeller imbalance as a result of wear of the blades;

• Wear union joint: the weakening of the landing of the impeller hub on the shaft of the impeller or weakening of stretch marks;

• weakening of the foundation bolts of machine or when the stiffness of the supporting structures is not sufficient;

• presence of a defect due to the installation of the engine under the legs during the uncalibrated centering plates;

• motor shaft misalignment and smoke exhaust;

• thermal expansion of the shaft and deformation due to increased flue gas temperature.

The reliability of the smoke exhaust is achieved through the elimination of all these mechanical defects.

The company "Balteh" For more than 15 years working in the market of industrial production, providing services to achieve reliability industrial equipment and supplying equipment for the execution of the concept of "Technology of reliability" in manufacturing. With this vast experience the company "Balteh" offers comprehensive solutions to improve the reliability of smoke exhausts on your business, namely:

1) The first in the domestic market of serial production of laser systems for shaft alignment and shaft lines (up to 31 sleeves) - "Quantum-LM-Ex";

2) To eliminate the imbalance of the impeller and the vibration diagnostics equipment by removing the spectral envelope and temporal realization of vibration - the instrument for dynamic balancing on its own supports Vibrometer-balancer BALTECH VP-3470;

3) calibrated plate series BALTECH-23458N, made of stainless steel, at times facilitate alignment process equipment and will save you time.

 

Laser system "QUANTUM-LM" (as well as its explosion-proof "QUANTUM-LM-Ex"), produced by "Balteh" is the best in terms of price / quality / performance on the market today.

On special attachment (mechanical and magnetic) measuring units mounted systems that are connected to the display unit, then they determine the parallel and angular misalignment of the equipment. Alignment can be carried out both vertical and horizontal. Measurements can be conducted hourly method or truncated corner - in three positions of the shaft when the equipment is no possibility to turn-hour basis.

Due to its high accuracy (up to 0,001 mm) systems "QUANTUM-LM" and "Quantum-LW-EX", which is impossible to achieve by classical devices for centering, as well as the device functionality, the alignment process is greatly simplified, albeit from a specialist requires some qualification. After the measurements, the system will show all the calculations and show how thick grooved plates series BALTECH-23458N, you must install the equipment under the legs. Results centering equipment is stored in its own memory system and via the program BALTECH-Expert is possible to maintain a database across the enterprise with the subsequent drawing up of reports and protocols.

Vibrometer-balancer BALTECH VP-3470 designed Dynamic balancing in its own bearings, manufactured by "Balteh", it is an excellent solution to eliminate the defect impeller imbalance. The device is a dual-channel vibration diagnostics and balancing system, as well as a single channel measurement speed (tachometer).

The device allows the balance to 4 planes. The device also includes a functional measurement of vibration on three parameters (vibration velocity, vibration acceleration and vibro), the measurement of the vibration phase, the machine speed. A device built into the possibility of withdrawing spectrum, time of implementation and envelope vibrodiagnostu help identify those or other defects on energized equipment, not only when it is developed, but also in early infancy.

To learn how to use professional

Купить Laser alignment, dynamic balancing and diagnostics smoke exhausts в Hamburg

Создано 27.01.2017 Изменено 27.01.2017


Похожие объявления

Diagnosis and repair of smoke exhausts
Состояние: Новый
В наличии
Hamburg (Германия)
Diagnosis centrifugal smoke exhausts (draft equipment)
Состояние: Новый
В наличии
Hamburg (Германия)
Diagnosis and repair of explosion-proof fans
Состояние: Новый
В наличии
Hamburg (Германия)
Diagnosis, service and repair of fans smoke
Состояние: Новый
В наличии
Hamburg (Германия)
Diagnosis and service centrifugal (radial) fans
Состояние: Новый
В наличии
Hamburg (Германия)
Reliability of low and high pressure fans
Состояние: Новый
В наличии
Hamburg (Германия)
Modern methods of diagnostics of cyclones
Состояние: Новый
В наличии
Hamburg (Германия)
How to ensure the reliability of the tangential (diametrical) fans
Состояние: Новый
В наличии
Hamburg (Германия)
Monitoring of the technical state of the diagonal fan
Состояние: Новый
В наличии
Hamburg (Германия)

Интересные статьи партнеров

Вы недавно смотрели