Features + dimensions of ball-bearing part ext. runners, 17mm groove: Do-It-Yourself with Hettich
Описание
Продолжительность: 01:06
Ball-bearing partial extension runners do not pull the drawer all the way out of the carcase. This always results in an extension loss that accounts for as much as 44 - 110 mm, depending on drawer length. The length of the ball-bearing partial extension runner is determined by drawer length. In our DIY range, you will find ball-bearing partial extension runners for drawer lengths from 185 mm to a maximum of 550 mm. When installing-ball bearing partial extension runners, make sure they fit flush with the furniture's front edge. If you position the first screw exactly 37 mm from the cabinet front edge, this will be perfect. Depending on size, these runners are attached with two to five horizontally aligned screws. The distance from the front to the rear screw is called "hole spacing", always a multiple of 32 mm. This is 128 mm for the smallest runner version, 288 mm for the largest. For more information, visit www.hettich.com
Комментарии 0
Интересные статьи партнеров
