Все видео

Construction Article: http://woodgears.ca/reader/walters/mitersaw.html I don't need a full time dedicated bench top wing support for my compound miter saw and I like to be able to roll the saw out of the way when it is not needed. I decided to mount it on a roll-around cabinet with detachable dust collection and...

Construction Article: http://woodgears.ca/reader/walters/mobile_cabinet.html 3-drawer cabinet for my drill press, drum sander and compound miter saw. I like being able to roll tools out of the way when they are not needed and additional drawer space is always handy. I incorporated a large steel plate to...

Shop Solutions Page 2: http://woodgears.ca/reader/walters/shop_solutions2.html Modification of a commercially available workbench to provide drawer storage and shop mobility for multiple uses.

Shop Solutions Page 2: http://woodgears.ca/reader/walters/shop_solutions2.html Plastic storage boxes neatly organized under my workbench. Also a handy small parts sorter demonstrated

Construction Article: http://woodgears.ca/reader/walters/reverse_motor.html Cooling Fan Video: http://youtu.be/3DuBdpLouZU Shaded pole motors come in a variety of shapes and sizes and are convenient for powering displays, models and marble machines. Sometimes these motors are running in the opposite direction we...

Construction Article: http://woodgears.ca/reader/walters/plexiglass_gears.html Plexiglas gears can be an attractive alternative for a lot of projects. This How To video gives you some tips on making these gears.

Construction Article: http://woodgears.ca/reader/walters/floorsweep.html An adaptor for a dust collector floor sweep - improved efficiency with a large floor broom.

Construction Article: http://woodgears.ca/reader/walters/drillpress_table.html Removable auxiliary table for a drill press with a low profile fence, a variety of clamping methods, dust collection, lighting, providing support and stability for larger woodworking projects.Construction article at http://woodgears.ca

Review of progress on a wood skeleton hand. The skeleton hand was made using a stencil pattern available on the Internet. The hand parts were shaped using the scroll saw and a Dremel tool. This video is a test of the pull-pull cords for the fingers and the spring tensioned center cords. There is still quite a bit of...

Construction Article: http://woodgears.ca/reader/walters/counter.html I built Matthias Wandel's Mechanical Counter using his Big Print Program to reduce the templates 50% and I expanded the counter to 4-digits. This is a fun and a relatively easy first time project for anyone considering building a wood gear clock...

Construction Article: http://woodgears.ca/reader/walters/steel_garage.html How To Video showing the various steps involved when building a typical bolt-together prefab self-supporting steel building. I show how I used a 30-gallon hot water heater for radiant heat, sprayed foam insulation, exhaust fan installation,...

Various Clock Projects: http://woodgears.ca/reader/walters/clock_wheels.html It has been well over one year since the Segmented Radial Grain (Radial) and the Circumferential And Radial Grain (C&R) wheels were made for the Solaris Clock. This is a review of how they have stood up to seasonal changes while inside my...

How to video showing a relatively simple way to improve the reception of signal sent by the remote control at the door opener. Our garage door opener worked perfectly for a couple of years. After trying different things (changing battery, having the remotes tested by the garage door company, noting how changes in...

Construction Article: http://woodgears.ca/reader/walters/mortiser_mount.html Bench Mortiser installation utilizing a confined recessed space, providing reasonable access for an infrequently used tool and not taking up valuable workbench space.

More Shop Solutions: http://woodgears.ca/reader/walters/shop_solutions.html Utilizing available space for cordless drill battery chargers. This keeps them out of the way and uses otherwise wasted space in my shop.